SKF 6214/HC5C3 is a hybrid ceramic deep groove ball bearing with a 70 mm bore, 125 mm outside diameter and 24 mm width. It belongs to the 6214 deep groove ball bearing size series, but the full suffix /HC5C3 is essential. It should not be treated as the same product as a standard 6214, 6214/C3 or sealed 6214 variation.
In a hybrid ceramic bearing, the rings are steel while the rolling elements are ceramic. This design may be considered when a buyer needs electrical insulation characteristics, reduced rolling-element mass or improved performance in specific speed and lubrication conditions. However, hybrid ceramic bearings are not a universal upgrade. The application, operating temperature, lubrication, load, speed and mounting accuracy must be checked first.
The C3 suffix indicates greater-than-normal internal clearance. Clearance affects operating temperature, speed, fit and bearing life. Replacing a C3 bearing with normal clearance, or the other way around, can cause operating problems even when the main dimensions appear correct. Buyers should always quote the complete bearing designation from the ring or original packaging.
Before sourcing SKF 6214/HC5C3, verify whether the requirement is for an open bearing, a sealed variation, a specific clearance, or another technical version. The product photo, cage type and any additional suffixes can be important. If the bearing is used in an electric motor, pump, compressor, gearbox or other rotating equipment, the equipment model and failure symptoms can help confirm the correct replacement.
FONKIN BEARING can support enquiries for SKF 6214/HC5C3 and related hybrid ceramic deep groove ball bearings. For a reliable quotation, send the complete model, quantity, photos, machine application, required delivery date and destination country. When the original bearing is damaged or the marking is unclear, send all available information first; it is better to verify before ordering than to replace the wrong bearing.
English
Spanish
Arabic
